Introducing EMC’s VNX Storage Analytics Suite (and Early Access Program)

imageWith VMworld in full swing, today EMC finalized the announcement of the new VNX Storage Analytics Suite (and you can try it out on the show floor).  You may remember that this was demoed first at EMC World.  As development was nearing completion, you may remember my call for beta testers (I hope you got in and got a chance to try out the technology).  Now we can start getting as excited as the software will be available for general consumption in Q4 of 2012.

 

imageThe VNX Storage Analytics Suite will offer you a an extensive platform to proactively identify bottlenecks, balance workloads and pinpoint the root cause of potential problems around health and performance.  The software is available as a stand alone product as well as integration for VMware’s vCOps Enterprise platform.  Pairing the two together allows you to have a full end-to-end visibility of your entire infrastructure from virtual machine to lun and every point in between.

 

imageFor those of you who are already familiar with vCOps, you will be presented with same interface just with extra options for looking at metrics.  The charts and display is the same.  Green is still good and Red is still bad.  This allows you to quickly visualize the health of your arrays (both block and file) using a simple “Performance-at-a-glance” tab.  Armed with this knowledge, you’ll be able to attach the problem directly instead of waiting for someone to tell you there is a slowdown in the environment.

 

imageBesides general health information, you can dig down into the specifics of utilization on the array.  In the picture to the right, you’ll be able to see the results (both historically and in real time) of enabling fast cache on your array and what it did to the overall health of your environment.  By focusing on the performance of the array and the pool disks, Fast Cache was able to increase the throughput of the SP while decreasing the strain on the spinning disk storage.

 

By this point you might be saying “Sean, this is so cool, I can’t wait until Q4!  How can I get my hands on this now?”.  Well for those of you who did not participate in the beta (and those of you who did and want to see the results of your feedback) there is good news.   EMC is going to be doing an Early Access program, it won’t cost you a penny, and I’ve got all the details right here!  The bad news is that it’s limited to 100 customers and it’s filling up fast.

 

If you may remember during the beta program I was asking people to email me if they wanted in.  This time I have no control over the process and you must go through your TC.  Before I tell you just how to get in, I need to make sure you have what is required in your environment.  You will need to meet the following prerequisites:

  • vCenter Operations Manager 5.0.1 Enterprise or higher (vApp distribution)
  • EMC VNX series system (Block: R31 OE version 05.31.000.5.720 and higher and VNX OE R32 version 05.32.000.5.006 and higher; File: VNX OE 7.0.35 and higher).

Seems simple enough, right?  Now on how to get in, as I said before you will need to contact your TC or Account Representative.  Have him or her place a Sales Evaluation order in Direct Express using Model # SASCONN-T90 and complete an RPQ.  Again, this is a no cost evaluation period and if you are selected, you will receive further instructions.  At the end of the preview period (which I believe is somewhere in Q4), you will be given the opportunity to purchase a license or uninstall the software.

 

If you are attending the show, please let me know your thoughts about the software in the comments section below.

Got a VNX and vCOps? We need your help!

imageIf you remember during EMC World 2012, the USD team showed off a preview of our new storage analytics package that would come as either a stand alone application or as a plugin for VMware vCOps.  As we move ever closer to a final product, we have entered the private beta phase.  This is where we need your help.

 

USD Engineering will be running a private beta between August 8th and August 29th and the test plan should take about 2 days to complete.  What you need is the following (UPDATED):

 

  • A VNX running recent code.  Both File 7.0 & 7.1 and Block 5.31 & 5.32 should be acceptable (this can be production or non production)
  • vCOps running the Enterprise or Enterprise+ (this must be a non production / test instance)
  • The name of your EMC contact (preferably a TC)
  • Please also indicate if you are a customer or a partner

You may need to sign an NDA, I’m not 100% on that but the team running the beta will be able to confirm.  Space is limited and we only have a few slots left so there is no guarantee that you will be accepted into the program.  If you are interested, please send an email to “sean.dot.thulin.at.emc.dot.com” with your contact information and what you have available as equipment (make / model of VNX and software version installed) and I will forward it on to the team.  Act fast as we are almost ready to start!